Dot laser, red, 650 nm, 3 mW, 3 V DC, Ø6x20 mm, Laser Class 3R, Focus fixed (5.0m), Cable length 10…

Punktlaser, rot, 650nm, 1mW, Laser Klasse 2, Fokus kollimiert, 3-12V DC, 9x20mm, DC-Hohlstecker 2.5mm The type is a dot laser that projects a red laser dot. This laser module can be operated without series resistor or control electronics. It can be simply attached to existing power supplies e.g. power supply units of small electrical devices or 12V vehicle power supply networks. The laser module has a controller electronic and just needs to be attached to a power supply (). Caused by laser classification , no TÜV-registration is necessary. The laser can be applied e.g. in discotheque events and it can be mounted in tools without any problems. (The laser protective measures are still to be considered.)The power consumption of is really low. Accordingly, two batteries can be used for operation and the laser module can be used mobile. Typical operation areas are low cost applications. The working life of the laser module exceeds .You may use our battery pack with 2 x 1.5 volt batteries as power supply. Abstrahlcharakteristik: elliptischer Punkt, Punktgröße <4..5mm@5m Optische Leistung: 1mW (Laserklasse 2); Fokus kollimiert Kompakte Bauform:9x20mm; Achsabweichung: bis zu 3,0°; DC-Hohlstecker 2.5mm Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik und dem Showbereich. Spannungsversorgung 3V bis 12V. Zur Stromversorgung können Sie z.B. das Netzteil Picotronic LFNT-3-C verwenden. Accessesories Magnetic Mount for Lasermodul 12mmØ9mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 9mm Magnetic Mount for Lasermodul 9mm09mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 9mm Bracket for Lasermodule 9mmØ9mm(25x67) Halterung-Ballhead für Lasermodule mit Durchmesser 9mm Mount for Lasermodul 9mmØ9mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 9mm Picotronic Stromversorgung LFNT-3-CNetzteil, Ausgang: 3V DC, mit DC-Stecker Ø2,5 mm (GND innen), Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4055132012427 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Dot Optical Power: 1 mW Laser Class: 2 Divergence: H - 1.0 mrad Beam Diameter: 3 mm Size of Laserdot: <4..5mm@5m Operating Distance: 10 m Optics: acryl lense Laser technology: diode Focus: collimated Electrical Parameters Potential of Housing: VDD(+) Operating Voltage: 3 - 12, typ 3 V DC Operating Current: 15 - 30, typ 25 mA Connector: 2.5 mm DC socket (GND pole inner) Cable color positive: red Cable color GND: black Power Supply: Power Supply, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max, Connector 2,5x5,5x9,5mm center negative Mechanical Parameters Size: Ø9x20 mm Material: Brass Cable length: 100 mm Wire type: 26AWG, 0,14mm² Output Aperture: 3 mm Weight: 6 g

Punktlaser, rot, 650nm, 5mW, Laser Klasse 3R, Fokus kollimiert, 3V DC, 8x23mm The type is a dot laser that projects a red laser dot. This diode laser module is distinguished by its high efficiency and its high lifetime of more than . The laser module has a controller electronic and just needs to be attached to a power supply (). Typical operation areas are low cost applications. A current of is drained. The laser module has fixed optics and can be used in light barriers, grade and slope control, or pointer applications. The temperature range of to enables the employment in many applications. The optical diode power of the laser module amounts to . Operating Voltage 3 V DC Laser Class 3R Compact size Fixed focus Low cost Abstrahlcharakteristik: elliptischer Punkt, Punktgröße 3,5mm Optische Leistung: 5mW (Laserklasse 3R); Fokus kollimiert Sehr Kompakte Bauform: 8x23mm; Achsabweichung: bis zu 3,0° Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik, Hobby, Handwerk, der Industrie und dem Showbereich. Spannungsversorgung 3V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V oder das Netzteil Picotronic LFNT-3 verwenden. Accessesories Bracket for Lasermodule 8mmØ8mm(58x145) LF-Halterung für Lasermodule mit Durchmesser 8mm Magnetic Mount for Lasermodul 8mmØ8mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 8mm Magnetic Mount for Lasermodul 12mmØ8mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 8mm Mount for Lasermodul 08mmØ8mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 8mm Bracket for Lasermodule 8mmØ8mm(25x66) Halterung-Ballhead für Lasermodule mit Durchmesser 8mm Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4260129041162 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Dot Optical Power: 5 mW Laser Class: 3R Divergence: G - 0.8 mrad Beam Diameter: 3.5 mm Operating Distance: 10 m Optics: acryl lense Laser technology: diode Focus: collimated Electrical Parameters Potential of Housing: VDD(+) Operating Voltage: 2.6 - 3.3, typ 3 V DC Operating Current: 10 - 30, typ 20 mA Cable color positive: red Cable color GND: white Mechanical Parameters Size: Ø8x23 mm Material: Brass Cable length: 100 mm Wire type: 26AWG, 0,14mm² Output Aperture: 3.5 mm Weight: 3.5 g

Punktlaser, rot, 650nm, 5mW, Laser Klasse 3R, Fokus kollimiert, 3-12V DC, 9x20mm The type is a dot laser that projects a red laser dot. This diode laser module is distinguished by its high efficiency and its high lifetime of more than . The laser module has a controller electronic and just needs to be attached to a power supply (). This laser module can be operated without series resistor or control electronics. It can be simply attached to existing power supplies e.g. power supply units of small electrical devices or 12V vehicle power supply networks. A current of is drained. Typical operation areas are low cost applications. The laser module has fixed optics and can be used in light barriers, grade and slope control, or pointer applications. The temperature range of to enables the employment in many applications. The optical diode power of the laser module amounts to . Operating Voltage 3-12V DC Laser Class 3R Low cost Fixed focus Compact size Abstrahlcharakteristik: elliptischer Punkt, Punktgröße <3..5mm@5m Optische Leistung: 5mW (Laserklasse 3R); Fokus kollimiert Kompakte Bauform:9x20mm; Achsabweichung: bis zu 3,0° Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen und der Robotertechnik. Spannungsversorgung 3V bis 12V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V oder das Netzteil Picotronic LFNT-3 verwenden. Accessesories Magnetic Mount for Lasermodul 12mmØ9mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 9mm Magnetic Mount for Lasermodul 9mm09mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 9mm Bracket for Lasermodule 9mmØ9mm(25x67) Halterung-Ballhead für Lasermodule mit Durchmesser 9mm Mount for Lasermodul 9mmØ9mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 9mm Power supply 3V DC (1200mA)Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4260129041254 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Dot Optical Power: 3.5 mW Laser Class: 3R Divergence: H - 1.0 mrad Beam Diameter: 2.5 mm Size of Laserdot: <3..5mm@5m Operating Distance: 10 m Optics: acryl lense Laser technology: diode Focus: collimated Electrical Parameters Potential of Housing: VDD(+) Operating Voltage: 3 - 12, typ 3 V DC Operating Current: 5 - 15, typ 10 mA Cable color positive: red Cable color GND: black Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max. Mechanical Parameters Size: Ø9x20 mm Material: Brass Cable length: 100 mm Wire type: 26AWG, 0,14mm² Output Aperture: 2.5 mm Weight: 6 g

Lasermodul, rot, 650nm, 1mW, Laserklasse 2, kompatibel mit Arduino, Raspberry Pi und ESP 8266 Boards Eye-safe laser module with 1mW power and a wavelength of 650nm. Specially developed for experimental setups and projects with Arduino, Raspberry Pi, ESP8266 and ESP32-Boards. The module can be directly connected with the socket strip of a microcontroller board through the 5V supply voltage and the pre-assembled connector pins. The laser is "active high" and can be operated pulsed with a TTL signal (5V) or in cw mode. Operating Voltage 5V DC Laser Class 2 Compact size Fixed focus Connectors for Arduino Raspberry PI ESP8266 and ESP32 Abstrahlcharakteristik: elliptischer Punkt, Punktgröße <3mm@1m Optische Leistung: 1mW (Laserklasse 2); Fokus kollimiert Kompakte Bauform:9x20mm; Achsabweichung: bis zu 3,0°, Modulierbar bis 200kHz Vorkonfektionierte Stecker für Anschluss an Mikrocontroller-Boards. Das Lasermodul ist kompatibel mit Arduino, Raspberry PI, ESP8266, ESP32 Für DIY-Elektronik-Projekte: Lichtschranke, Signalübertragung, Messtechnik, Laser-Projektor. Spannungsversorgung 5V Accessesories Magnetic Mount for Lasermodul 10mm10mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 10mm Magnetic Mount for Lasermodul 12mmØ10mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 10mm Mount for Lasermodul 10mmØ10mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 10mm 5V Power supply 5V DC (1000mA)Netzteil, Ausgang: 5V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4055132012229 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -20°C - 65 °C Optical Parameters Beam Shape: Dot Optical Power: 1 mW Laser Class: 2 Divergence: J - 2.0 mrad Size of Laserdot: <5 mm@1m, <1mm@0.5m Operating Distance: 0.5 m Optics: acryl lense Laser technology: Single Mode Diode Focus: fixed Electrical Parameters Max. Mod. Frequency: 200 kHz Operating Voltage: 4.5 - 5.5, typ 5 V DC Operating Current: 5 - 18, typ 10 mA Cable color positive: red Cable color GND: black Cable color modulation: yellow Power Supply: Power Supply with stripped/tinned wires, Output: 5V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3W max. Mechanical Parameters Size: Ø10x26 mm Material: Brass Cable length: 250 mm Wire type: 26AWG, 0,14mm² Housing Color: brass Weight: 6 g Buy ARD-LASER-MDI650-1-5(10x26) on Amazon

Fokussierbarer Punktlaser, rot, 650nm, 3mW, Laser Klasse 3R, Fokus einstellbar, 3V DC, 6x20mm The type is a dot laser that projects a red laser dot. This diode laser module is distinguished by its high efficiency and its high lifetime of more than . The laser module has a controller electronic and just needs to be attached to a power supply (). Typical operation areas are low cost applications. A current of is drained. The laser module has fixed optics and can be used in light barriers, grade and slope control, or pointer applications. The temperature range of to enables the employment in many applications. The optical diode power of the laser module amounts to . Operating Voltage 3 V DC Laser Class 3R Compact size Adjustable focus Low cost Abstrahlcharakteristik: elliptischer Punkt, Punktgröße kann variiert werden Optische Leistung: 3mW (Laserklasse 3R); Fokus einstellbar Sehr kompakte Bauform:6x20mm; Achsabweichung: bis zu 3,0° Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik und dem Showbereich. Spannungsversorgung 3V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V oder das Netzteil Picotronic LFNT-3 verwenden. Accessesories Mount for Lasermodul 06mmØ6mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 6mm Magnetic Mount for Lasermodul 6mmØ6mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 6mm Magnetic Mount for Lasermodul 12mmØ6mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 6 mm Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4055132011284 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -10°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Dot Optical Power: 3 mW Laser Class: 3R Divergence: H - 1.0 mrad Size of Laserdot: adjustable Operating Distance: 10 m Optics: acryl lense Laser technology: Single Mode Diode Focus: adjustable Electrical Parameters Potential of Housing: VDD(+) Operating Voltage: 2.6 - 3.3, typ 3 V DC Operating Current: 10 - 30, typ 20 mA Cable color positive: red Cable color GND: black Mechanical Parameters Size: Ø6x20 mm Material: Brass Cable length: 100 mm Wire type: 26AWG, 0,14mm² Output Aperture: 3 mm Weight: 2.2 g

Punktlaser, rot, 650nm, 1mW, Laser Klasse 2, Fokus kollimiert, 3V DC, 6x17mm The type is a dot laser that projects a laser dot. The laser module emits light of the wavelength . This diode laser module measures x . Accordingly, it is a small and effective laser source. The optimal operation range of the laser is .You may use our battery pack with 2 x 1.5 volt batteries as power supply. This dot laser can be applied e.g. in laser levels, laser marking systems, robotics, and laser entertainment area. This module is laser class . The working life of the laser module exceeds . Operating Voltage 3 V DC Laser Class 2 Low power consumption Compact size Low cost Abstrahlcharakteristik: elliptischer Punkt, Punktgröße <8mm@10m Optische Leistung: 1mW (Laserklasse 2); Fokus kollimiert sehr kompakte Bauform: 6x17mm; Achsabweichung: bis zu 3,0° Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik, in Industrie, Handwerk, Hobby und dem Showbereich. Spannungsversorgung 3V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V oder das Netzteil Picotronic LFNT-3 verwenden. Accessesories Mount for Lasermodul 06mmØ6mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 6mm Magnetic Mount for Lasermodul 6mmØ6mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 6mm Magnetic Mount for Lasermodul 12mmØ6mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 6 mm Power supply 3V DC (1200mA)Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4260129044736 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Dot Optical Power: 1 mW Laser Class: 2 Divergence: H - 1.0 mrad Beam Diameter: 3 mm Size of Laserdot: <8mm@10m Operating Distance: 10 m Optics: acryl lense Laser technology: Single Mode Diode Focus: collimated Electrical Parameters Potential of Housing: VDD(+) Operating Voltage: 2.7 - 3.3, typ 3 V DC Operating Current: 5 - 15, typ 10 mA Cable color positive: red Cable color GND: black Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max. Mechanical Parameters Size: Ø6x17 mm Material: Brass Cable length: 70 mm Wire type: Belden, Typ 1007, 26AWG Output Aperture: 3 mm Weight: 2 g Buy LFD650-1-3(6x17) on Amazon