Kreuzlaser Kreuz Laser rot 635nm 5mW 45° 3-5VDC 9x20mm

Line lasermodule, red, 635nm, 5mW, 60°, class 1, focus 1m, 3-6V DC, 9x20mm The type LFL635-5-6(9x20)60 is a laser that projects a red laser line. The laser module emits light of the wavelength 635nm. Using a special optics the laser module produces a sharp line without using rotating polygon mirrors or motors. The controller electronic and the built in optics are integrated into the housing. The size of the housing amounts to 9x20mm. The operation range of the laser is 1 m. This line laser can be applied e.g. in laser levels, laser marking systems, robotics, and laser entertainment area. This laser module can be operated without series resistor or control electronics. It can be simply attached to existing power supplies e.g. power supply units of small electrical devices. The focus is optimized for a operation range of 1m. A optimal focused laser line with a line width of approximate 1,1m is displayed at this distance. Caused by laser classification 1, no TÜV-registration is necessary. The laser can be applied e.g. in discotheque events and it can be mounted in tools without any problems. Operating Voltage 3-6V DC Laser Class 1 Compact size Uniform line thickness Low cost Abstrahlcharakteristik: Linie, Liniendicke <1,2mm@1m; Laser mit 635nm besitzen eine bessere Sichtbarkeit als z.B. Laser mit 650nm. Optische Leistung: 5mW (Laserklasse 1); Fokus 1m Kompakte Bauform: 9x20mm; Öffnungswinkel: 60°; Achsabweichung: bis zu 3,0° Der Öffnungswinkel (60°) erzeugt, bei einem Arbeitsabstand von 1m, eine Laserlinienlänge von 1,1m. Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik und dem Showbereich. Stromversorgung 3V bis 6V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V oder das Netzteil Picotronic LFNT-3 verwenden. Accessesories Magnetic Mount for Lasermodul 12mmØ9mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 9mm Magnetic Mount for Lasermodul 9mm09mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 9mm Bracket for Lasermodule 9mmØ9mm(25x67) Halterung-Ballhead für Lasermodule mit Durchmesser 9mm Mount for Lasermodul 9mmØ9mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 9mm Power supply 3V DC (1200mA)Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4260129041742 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Line Optical Power: 5 mW Laser Class: 1 Divergence: H - 1.0 mrad Fan Angle: 60 ° Line Thickness: <1.2mm@1m Operating Distance: 2 m Optics: acryl lense Laser technology: diode Focus: fixed (1000mm) Electrical Parameters Potential of Housing: VDD(+) Operating Voltage: 3 - 6 V DC Operating Current: 20 - 60, typ 40 mA Cable color positive: red Cable color GND: black Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max. Mechanical Parameters Size: Ø9x20 mm Material: Brass Cable length: 100 mm Wire type: 26AWG, 0,14mm² Output Aperture: 6 mm Weight: 6 g Stripping of wire: 5 mm Buy LFL635-5-6(9x20)60 on Amazon

cross lasermodule, red, 650nm, 5mW, 45°, class 1, focus 0.1m, 3-12V DC, 9x20mm The type LFC650-5-12(9x20)45-F100 is a laser that projects a red laser cross. This laser module emits light of the wavelength 650nm. The diode laser module measures 9x20mm. The fan angle of 45° generates a laser cross of 0.08m length at a working distance of 0.1m. The operating voltage is 3 to 12 volts. This positioning laser is an universal tool for industry, hobby and trade. It reduces the effort that has to be put into positioning and alignment tasks. This module is laser class 1. Abstrahlcharakteristik: Kreuz, Liniendicke <1mm@0,1m; Optische Leistung: Laserklasse 1; Fokus 0,1m Kompakte Bauform: 9x20mm; Öffnungswinkel: 45°; Achsabweichung: bis zu 3,0° Der Öffnungswinkel (45°) erzeugt, bei einem Arbeitsabstand von 0,1m, eine Laserlinienlänge von 0,08m. Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik und dem Showbereich. Spannungsversorgung 3V bis 12V. Zur Stromversorgung können Sie z.B. unser Picotronic Netzteil LFNT-3 verwenden. Accessesories Magnetic Mount for Lasermodul 12mmØ9mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 9mm Magnetic Mount for Lasermodul 9mm09mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 9mm Bracket for Lasermodule 9mmØ9mm(25x67) Halterung-Ballhead für Lasermodule mit Durchmesser 9mm Mount for Lasermodul 9mmØ9mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 9mm Power supply 3V DC (1200mA)Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4260129041834 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Cross Optical Power: 3.5 mW Laser Class: 1 Divergence: H - 1.0 mrad Fan Angle: 45 ° Line Thickness: <1mm@0.1m Operating Distance: 0.1 m Optics: acryl lense Laser technology: diode Focus: fixed (100mm) Electrical Parameters Potential of Housing: VDD(+) Operating Voltage: 3 - 12, typ 3 V DC Operating Current: 30 mA Cable color positive: red Cable color GND: black Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max. Mechanical Parameters Size: Ø9x20 mm Material: Brass Cable length: 100 mm Output Aperture: 6 mm Weight: 6 g Buy LFC650-5-12(9x20)45-F100 on Amazon

Punktlaser, rot, 650nm, 0,4mW, Laser Klasse 1, Fokus kollimiert, 3-12V DC, 9x20mm The type LFD650-0.4-12(9x20) is a dot laser that projects a red laser dot. This laser module can be operated without series resistor or control electronics. It can be simply attached to existing power supplies e.g. power supply units of small electrical devices or 12V vehicle power supply networks. The laser module has a controller electronic and just needs to be attached to a power supply. Caused by laser classification 1, no TÜV-registration is necessary. The laser can be applied e.g. in discotheque events and it can be mounted in tools without any problems. (The laser protective measures are still to be considered.)The power consumption of 25mA is really low. Accordingly, two batteries can be used for operation and the laser module can be used mobile. Typical operation areas are low cost applications. The working life of the laser module exceeds 3000h.You may use our battery pack with 2 x 1.5 volt batteries as power supply. Compact size Laser Class 1 Low power consumption Operating Voltage 3-12V DC Low cost Abstrahlcharakteristik: elliptischer Punkt, Punktgröße <4..5mm@5m Optische Leistung: 0,4mW (Laserklasse 1); Fokus kollimiert Kompakte Bauform:9x20mm; Achsabweichung: bis zu 3,0° Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik und dem Showbereich. Spannungsversorgung 3V bis 12V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V verwenden. Accessesories Magnetic Mount for Lasermodul 12mmØ9mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 9mm Magnetic Mount for Lasermodul 9mm09mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 9mm Bracket for Lasermodule 9mmØ9mm(25x67) Halterung-Ballhead für Lasermodule mit Durchmesser 9mm Mount for Lasermodul 9mmØ9mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 9mm Power supply 3V DC (1200mA)Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4260129041728 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Dot Optical Power: 0.4 mW Laser Class: 1 Divergence: H - 1.0 mrad Beam Diameter: 3 mm Size of Laserdot: <4..5mm@5m Operating Distance: 10 m Optics: acryl lense Laser technology: diode Focus: collimated Electrical Parameters Operating Voltage: 3 - 12, typ 3 V DC Operating Current: 5 - 25, typ 15 mA Cable color positive: red Cable color GND: black Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max. Mechanical Parameters Size: Ø9x20 mm Material: Brass Cable length: 100 mm Wire type: 26AWG, 0,14mm² Output Aperture: 3 mm Weight: 6 g Buy LFD650-0.4-12(9x20) on Amazon

cross lasermodule, red, 650nm, 5mW, 45°, class 1, focus 1m, 3-12V DC, 9x20mm The type LFC650-5-12(9x20)45 is a laser that projects a red laser cross. This laser module emits light of the wavelength 650nm. The diode laser module measures 9x20mm. The fan angle of 45° generates a laser cross of 0.8m length at a working distance of 1m. The operating voltage is 3 to 12 volts. This positioning laser is an universal tool for industry, hobby and trade. It reduces the effort that has to be put into positioning and alignment tasks. This module is laser class 1. Abstrahlcharakteristik: Kreuz, Liniendicke <1,2mm@1m; Optische Leistung: 5mW (Laserklasse 1); Fokus 1m Kompakte Bauform: 9x20mm; Öffnungswinkel: 45°; Achsabweichung: bis zu 3,0°; Orthogonalität: 1° Der Öffnungswinkel (45°) erzeugt, bei einem Arbeitsabstand von 1m, eine Laserlinienlänge von 0,8m. Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik und dem Showbereich. Stromversorgung 3V bis 12V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V verwenden. Accessesories Magnetic Mount for Lasermodul 12mmØ9mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 9mm Magnetic Mount for Lasermodul 9mm09mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 9mm Bracket for Lasermodule 9mmØ9mm(25x67) Halterung-Ballhead für Lasermodule mit Durchmesser 9mm Mount for Lasermodul 9mmØ9mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 9mm Power supply 3V DC (1200mA)Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4260129041247 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Cross Optical Power: 5 mW Laser Class: 1 Divergence: H - 1.0 mrad Fan Angle: 45 ° Line Thickness: <1.2mm@1m Operating Distance: 1 m Optics: acryl lense Laser technology: diode Focus: fixed (1000mm) Verticality: < ± 1 ° Electrical Parameters Operating Voltage: 3 - 12, typ 3 V DC Operating Current: 10 - 30, typ 20 mA Cable color positive: red Cable color GND: black Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max. Mechanical Parameters Size: Ø9x20 mm Material: Brass Cable length: 100 mm Wire type: 26AWG, 0,14mm² Output Aperture: 6 mm Weight: 6 g Buy LFC650-5-12(9x20)45 on Amazon

cross lasermodule, red, 650nm, 5mW, 60°, class 1, focus adjustable, 3-5V DC, 9x26mm, connector 2.1mm The type CB635-5-5(9x26)60-ADJ-CON is a laser that projects a red laser cross. This type of laser module with its wavelength of 635nm has an enhanced visibility over a comparable laser with 650nm wavelength. The diode laser module measures 9x26mm. The fan angle of 60° generates a laser cross of 1,1m length at a working distance of 1m. The operating voltage is 3 to 5 volts. This positioning laser is an universal tool for industry, hobby and trade. It reduces the effort that has to be put into positioning and alignment tasks. This module is laser class 1. Abstrahlcharakteristik: Kreuz, Liniendicke kann variiert werden; Laser mit 635nm besitzen eine bessere Sichtbarkeit als z.B. Laser mit 650nm. Optische Leistung: 5mW (Laserklasse 1); Fokus einstellbar Kompakte Bauform: 9x26mm; Öffnungswinkel: 60°; Achsabweichung: bis zu 3,0°; Mit DC-Hohlstecker 2.1mm Der Öffnungswinkel (60°) erzeugt, bei einem Arbeitsabstand von 1m, eine Laserlinienlänge von 1,1m. Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik und dem Showbereich. Stromversorgung 3V bis 5V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V oder das Netzteil Picotronic LFNT-5-C verwenden. Accessesories Magnetic Mount for Lasermodul 12mmØ9mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 9mm Magnetic Mount for Lasermodul 9mm09mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 9mm Bracket for Lasermodule 9mmØ9mm(25x67) Halterung-Ballhead für Lasermodule mit Durchmesser 9mm Mount for Lasermodul 9mmØ9mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 9mm Picotronic Stromversorgung LFNT-5-CNetzteil, Ausgang: 5V DC, mit DC-Stecker Ø2,1 mm (GND innen), Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4055132013714 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 10,000 h Operating Temperature: -10°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Cross Optical Power: 5 mW Laser Class: 1 Divergence: B - 0.3 mrad Fan Angle: 60 ° Operating Distance: 1 m Optics: acryl lense Laser technology: Single Mode Diode Focus: adjustable Electrical Parameters Potential of Housing: VDD(+) Operating Voltage: 3 - 5 V DC Operating Current: 15 - 60, typ 30 mA Connector: 2.1 mm DC socket (GND inner) Cable color positive: red Cable color GND: black Power Supply: Power Supply, Output: 5V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3W max, Connector 2,1x5,5x9,5mm center negative Mechanical Parameters Size: Ø9x26 mm Material: Brass Cable length: 150 mm Wire type: Belden, Typ 1007, 26AWG Output Aperture: 6 mm Weight: 8.1 g Stripping of wire: 5 mm

Punktlaser, grün, 532nm, 1mW, Laser Klasse 2, Fokus kollimiert, 3V DC, 12x60mm The type is a dot laser that projects a laser dot. This laser has a very compact design ( x ). This diode laser module is distinguished by its high efficiency and its high lifetime of more than .High-quality laser moduleThe diode has a power of . Therefore, the module can be used in different applications and also in room light. This module is perfectly suited for leveling and positioning tasks. Caused by laser classification , no regulatory registration is necessary. The laser can be applied e.g. in discotheque events and it can be mounted in tools without any problems. Operating Voltage 3V DC Fixed focus Laser Class 2 Compact size Abstrahlcharakteristik: elliptischer Punkt, Punktgröße <4mm@10m Optische Leistung: 1mW (Laserklasse 2); Fokus kollimiert kompakte Bauform: 12x60mm; Achsabweichung: bis zu 3,0° Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik, in Industrie, Handwerk, Hobby und dem Showbereich. Spannungsversorgung 3V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V oder das Netzteil Picotronic LFNT-3 verwenden. Accessesories Magnetic Mount for Lasermodul 12mm12mm(48x86) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 12mm Magnetic Mount for 12mm Laser ModuleØ12mm (36x62) Magnetic holder for 12mm laser module, diameter 36mm, height 62mm, plastic Magnetic Mount for Lasermodul 12mmØ12mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 12mm Mount for Lasermodul 12mmØ12mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 12mm Mount for Lasermodul 12mmØ12mm(20x57) MOUNT für Lasermodule mit Durchmesser 12mm Bracket for Lasermodule 12mmØ12mm(25x70) Halterung-Ballhead für Lasermodule mit Durchmesser 12mm Power supply 3V DC (1200mA)Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-405-532 according to DIN EN 207, suitable for blue and green wavelengths >400 - 532 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications Bracket for Lasermodule 12mm Main Data EAN: 4260129042145 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 5,000 h Operating Temperature: 15°C - 30 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Dot Optical Power: 1 mW Laser Class: 2 Divergence: D - 0.5 mrad Beam Diameter: 2.5 mm Size of Laserdot: <4mm@10m Operating Distance: 50 m Optics: glass lens AR coated Beam Mode: TEM00 Laser technology: Solid State (YVO4+KTP) Focus: collimated Warm up time: < 15 min Electrical Parameters Potential of Housing: isolated Operating Voltage: 2.7 - 3.3, typ 3 V DC Operating Current: 125 - 375, typ 250 mA Cable color positive: red Cable color GND: blue Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max. Mechanical Parameters Size: Ø12x60 mm Material: aluminium Cable length: 100 mm Wire type: 26AWG, 0,14mm² Output Aperture: 3 mm Housing Color: black Weight: 13.5 g Stripping of wire: 5 mm Buy LFD532-1-3(12x60)-001 on Amazon